Easy crochet patterns, cute projects, and beginner-friendly ideas to inspire your next make.

This crochet bear pattern makes a small classic teddy bear with a mostly continuous construction and very little assembly. The body and head are worked as one main piece, while the legs, arms, and ears are crocheted directly into the rounds instead of being made separately.
Only the muzzle is crocheted as a separate piece and sewn onto the face. This keeps assembly to a minimum while creating a distinct muzzle area for the teddy-bear face.
The stitch counts and feature placements in this pattern have been mathematically checked. Finished size, exact proportions, posture, muzzle placement, and facial positioning will still depend on your yarn, hook, tension, stuffing, and physical sample results.
Table of Contents
Crochet Bear Pattern at a Glance
| Detail | Pattern |
|---|---|
| Style | Classic teddy bear amigurumi |
| Main construction | Continuous body and head |
| Main rounds | 23 |
| Maximum body count | 24 sts |
| Neck | 18 sts |
| Maximum head count | 30 sts |
| Legs | Integrated |
| Arms | Integrated |
| Ears | Integrated |
| Muzzle | Separate 3-round piece |
| Stuffing | Yes |
| Assembly | Low-sew / minimal assembly |
| Terminology | US crochet terms |
This is a low-sew pattern, not a true no-sew pattern, because the muzzle is attached separately.
What You’ll Need
- main yarn for the bear;
- optional contrasting yarn for the muzzle;
- black or dark brown yarn or embroidery thread for facial details;
- polyester stuffing;
- crochet hook suitable for your chosen yarn;
- yarn needle;
- scissors;
- stitch marker.

This pattern does not prescribe a fixed yarn weight, hook size, gauge, yardage, or finished measurement. Different materials and tension will change the finished size, firmness, and proportions of the bear.
Crochet Stitches and Abbreviations
This pattern uses US crochet terminology.
- MR — magic ring
- ch — chain
- sc — single crochet
- inc — increase: work 2 sc in the same stitch
- dec — single crochet decrease over the next 2 stitches
- dc — double crochet
- sl st — slip stitch
- st / sts — stitch / stitches
- EB — ear bobble
- LB — limb bobble
For a general terminology reference, see the Craft Yarn Council crochet abbreviations.
Important Round Rules
The main bear is worked in joined rounds and is not turned.
At the beginning of each new round, ch 1 unless otherwise stated.
The beginning ch 1 does not count as a stitch.
The joining slip stitch does not count as a stitch.
When the next round begins in the same stitch as the join, work into the actual stitch below the joining slip stitch rather than into the slip stitch itself.
Keep the beginning of the round or stitch marker aligned as consistently as possible at the back center of the bear. The leg, arm, and ear placements use that position as their reference.
Special Stitches
Ear Bobble — EB
Work all parts into the same base stitch:
[Yo, insert hook in st, yo and pull up a loop, yo and pull through 2 loops] ×4.
You should now have 5 loops on your hook.
Yarn over and pull through all 5 loops.
Push the bobble toward the outside of the work.
One EB consumes 1 base stitch and counts as 1 completed stitch.
Limb Bobble — LB
Work all parts into the same base stitch:
[Yo, insert hook in st, yo and pull up a loop, yo and pull through 2 loops] ×5.
You should now have 6 loops on your hook.
Yarn over and pull through all 6 loops.
Push the bobble toward the outside.
One LB consumes 1 base stitch and counts as 1 completed stitch.
Important Bobble Rule
On the round immediately after an EB or LB, work one sc into the top of that bobble.
Do not skip the bobble, and do not work more than one stitch into it. Each bobble still counts as one stitch in the round total.
Before You Start This Crochet Bear Pattern
The bear is built from the bottom of the body upward into the head.
The stitch-count structure is:
Body base:
6 → 12 → 18 → 24
Neck:
24 → 18
Head:
18 → 24 → 30
Head closure:
30 → 24 → 18 → 12 → 6
The integrated features are worked in these rounds:
- Round 5: two legs
- Round 9: two arms
- Round 17: two ears
The separate muzzle is worked in three rounds:
8 → 14 → 14
The stitch math and feature positions have been verified. The finished posture, ear and limb projection, muzzle size, muzzle attachment position, and facial placement still need to be judged on a physical crocheted sample.
How to Crochet the Bear
Step 1: Crochet the Body Base
Round 1
Make a magic ring.
Work 6 sc into the MR.
Pull the ring closed.
Join with a sl st to the first sc.
[6]
Round 2
Ch 1.
Work an increase in each stitch around.
Join.
[12]
Calculation:
6 × 2 = 12 sts
Round 3
Ch 1.
Repeat:
sc in next st, inc in next st
6 times.
Join.
[18]
Round 4
Ch 1.
Repeat:
sc in next 2 sts, inc in next st
6 times.
Join.
[24]
You now have the maximum body circumference used in the lower torso.

Step 2: Crochet the Legs Directly Into the Body
Round 5
Ch 1.
Work:
sc in next 9 sts, LB in next st, sc in next 4 sts, LB in next st, sc in next 9 sts.
Join.
[24]
Stitch Check
The round uses all 24 available stitch positions:
9 + 1 + 4 + 1 + 9 = 24
The two limb bobbles are worked at stitch positions 10 and 15 relative to the back-center round start.
The front-center line lies between stitches 12 and 13, so these two leg positions are evenly distributed on either side of it.
Push both bobbles outward before continuing.
Round 6
Ch 1.
Sc in each stitch around, working one sc into the top of each LB.
Join.
[24]
Step 3: Build the Lower Torso
Round 7
Ch 1.
Sc around.
Join.
[24]
Round 8
Ch 1.
Sc around.
Join.
[24]
These straight rounds add height to the lower body before the arm placement.
Step 4: Crochet the Arms Into the Torso
Round 9
Ch 1.
Work:
sc in next 6 sts, LB in next st, sc in next 11 sts, LB in next st, sc in next 5 sts.
Join.
[24]
Stitch Check
6 + 1 + 11 + 1 + 5 = 24
The arm bobbles occupy stitch positions 7 and 19 relative to the back-center round reference, placing them around the two side regions of the torso.
Push both bobbles outward.
Round 10
Ch 1.
Sc around, working one sc into the top of each arm bobble.
Join.
[24]
Step 5: Shape the Neck
Round 11
Ch 1.
Repeat:
sc in next 2 sts, dec over next 2 sts
6 times.
Join.
[18]
Each repeat consumes 4 base stitches and creates 3 stitches:
24 → 18
Round 12
Ch 1.
Sc around.
Join.
[18]
This creates the narrower transition between the torso and the head.
The final appearance of the neck will depend on the yarn, tension, and stuffing used.

Step 6: Expand the Head
Round 13
Ch 1.
Repeat:
sc in next 2 sts, inc in next st
6 times.
Join.
[24]
Round 14
Ch 1.
Repeat:
sc in next 3 sts, inc in next st
6 times.
Join.
[30]
Round 15
Ch 1.
Sc around.
Join.
[30]
Round 16
Ch 1.
Sc around.
Join.
[30]
The head reaches a larger maximum stitch count than the torso, creating a structural distinction between the two sections.
Step 7: Crochet the Ears Into the Head
Round 17
Ch 1.
Work:
sc in next 7 sts, EB in next st, sc in next 14 sts, EB in next st, sc in next 7 sts.
Join.
[30]
Stitch Check
7 + 1 + 14 + 1 + 7 = 30
The ear bobbles are worked at stitch positions 8 and 23.
These positions are evenly distributed around the side regions of the 30-stitch head when the round start is maintained at the back center.
Push both ears outward before continuing.
Round 18
Ch 1.
Sc around, working one sc into the top of each EB.
Join.
[30]
Round 19
Ch 1.
Sc around.
Join.
[30]
There are no separate ear pieces to sew on later.

Step 8: Add the Stuffing
Begin stuffing gradually while the head opening is still accessible.
Distribute the stuffing through the body and head without forcing large amounts directly behind the leg, arm, or ear bobbles.
Try to preserve the narrower neck transition instead of packing it so firmly that the distinction between the body and head disappears.
The exact amount of stuffing and the most convenient time to add it will vary with yarn and hook choice. Those details should not be treated as fixed until the pattern is physically tested.

Step 9: Shape and Close the Head
Round 20
Ch 1.
Repeat:
sc in next 3 sts, dec over next 2 sts
6 times.
Join.
[24]
Round 21
Ch 1.
Repeat:
sc in next 2 sts, dec over next 2 sts
6 times.
Join.
[18]
Add or redistribute stuffing while the opening is still accessible.
Round 22
Ch 1.
Repeat:
sc in next st, dec over next 2 sts
6 times.
Join.
[12]
Check the stuffing again before the final round.
Round 23
Ch 1.
Work:
dec ×6
[6]
Fasten off, leaving enough yarn to close the remaining opening securely.
Use a yarn needle to close the gap and weave in the end.
Crochet the Teddy Bear Muzzle
The muzzle is the only separately crocheted piece in this crochet teddy bear pattern.
Foundation
Ch 4.
Do not turn after completing the first side. You will work around both sides of the foundation chain.
Muzzle Round 1
Starting in the second chain from the hook:
- sc in next ch;
- sc in next ch;
- 3 sc in last ch;
- rotate the work to crochet along the opposite side of the foundation chain;
- sc in next available chain loop;
- 2 sc in the final chain position.
Join to the first sc.
[8]
Count:
1 + 1 + 3 + 1 + 2 = 8
Muzzle Round 2
Ch 1.
Work:
- inc in first st;
- sc in next st;
- inc in each of the next 3 sts;
- sc in next st;
- inc in each of the final 2 sts.
Join.
[14]
Calculation:
2 + 1 + 6 + 1 + 4 = 14
All 8 stitches from the previous round are consumed exactly once.
Muzzle Round 3
Ch 1.
Sc around.
Join.
[14]
Fasten off, leaving a tail long enough for attachment.
Do not lock an exact stuffing amount yet. The muzzle can be tested flat and lightly shaped or stuffed during physical sampling to determine which version gives the clearest teddy-bear profile.

Attach the Muzzle and Add the Face
Position the muzzle on the lower front of the head.
Before sewing it permanently, check the placement from both the front and side. The exact attachment round and stitch coordinates are intentionally not fixed because the best position depends on the finished head proportions.
Once the position looks balanced, sew the muzzle securely to the head.
Use black or dark brown yarn or embroidery thread to add:
- two embroidered eyes;
- an embroidered nose;
- a short embroidered mouth.
Exact eye spacing, eye round, nose position, and mouth placement should be finalized only after evaluating a physical sample.
The face strongly influences whether the finished animal reads as a teddy bear, so check the finishing placement before changing any mathematically verified body or head counts.

Bear Shape Check
When the bear is complete, confirm that the construction contains:
- two integrated legs;
- two integrated arms;
- two integrated ears;
- one continuous body and head;
- one separately attached muzzle;
- a narrower neck;
- a head with a larger maximum circumference than the torso.
Check the rounds immediately after each bobble to make sure you worked exactly one sc into the top of every LB or EB.
Also check that no accidental increases occurred in the straight body or head rounds.
The finished seated or upright posture will depend on yarn, hook, stuffing, and how strongly the integrated limb bobbles project.
Troubleshooting the Crochet Bear Pattern
The Stitch Count Changed After a Bobble
Every LB and EB consumes one base stitch and counts as one completed stitch.
On the following round, work exactly one sc into the top of the bobble.
Skipping it reduces the stitch count. Working more than one stitch into it increases the count.
A Leg, Arm, or Ear Is Sitting Inside the Bear
Push the bobble outward immediately after completing it.
When stuffing, avoid forcing too much stuffing directly behind the feature.
The Neck Looks Too Tight
Check Round 11 before changing the pattern.
It should decrease cleanly from:
24 sts → 18 sts
If the count is correct, the visual effect may be influenced by stuffing or yarn tension.
The Head Looks Too Small
Verify the head increases:
Round 13: 18 → 24
Round 14: 24 → 30
Do not change the stitch counts until you have confirmed that both increase rounds were worked correctly.
The Bear Face Looks Too Generic
First check the muzzle and embroidery placement.
The muzzle, eyes, nose, and mouth strongly influence the finished expression and teddy-bear appearance.
Do not automatically change the mathematically verified head construction to correct a facial-positioning issue.
The Muzzle Looks Too Flat or Too Bulky
The current pattern does not prescribe a fixed stuffing amount for the muzzle.
Compare a flat attachment with a lightly shaped version during physical testing before locking the final finishing recommendation.
Why This Teddy Bear Pattern Is Low-Sew
This pattern reduces the number of separate pieces compared with a traditional multi-piece teddy bear.
The following are worked directly into the main construction:
- body;
- head;
- two legs;
- two arms;
- two ears.
Only the muzzle is crocheted separately and sewn onto the face.
That makes this a minimal-assembly or low-sew bear pattern, not a no-sew pattern.
A yarn needle is also used to close the final opening, weave in ends, embroider facial details, and attach the muzzle.
More Small Amigurumi Patterns
If you enjoy small animal projects, try our crochet bunny pattern next for another classic amigurumi shape.
You can also make our crochet panda pattern for another bear-style project with a very different black-and-white look.
For a small food-themed project, try our dumpling crochet pattern.
Frequently Asked Questions
Is This Crochet Bear Pattern Free?
Yes. This free crochet bear pattern includes the complete written instructions for the body, head, integrated legs, integrated arms, integrated ears, separate muzzle, stuffing, closure, and finishing.
Is This the Same as a Crochet Teddy Bear Pattern?
Yes. This design follows a classic teddy-bear amigurumi structure, so crochet bear pattern and crochet teddy bear pattern naturally describe the same project here.
Is This a No-Sew Bear?
No.
This is a low-sew pattern because the muzzle is made separately and attached to the face.
The arms, legs, ears, body, and head do not require separate assembly.
How Many Rounds Are in the Bear?
The continuous main bear contains 23 rounds.
The separate muzzle contains 3 rounds.
Are the Arms and Legs Separate Pieces?
No.
The legs are crocheted directly into Round 5, and the arms are worked directly into Round 9 using limb bobbles.
Are the Ears Sewn On?
No.
Both ears are crocheted directly into Round 17 using ear bobbles.
Is This Bear Pattern Suitable for Beginners?
The pattern uses a relatively compact stitch vocabulary and minimizes assembly, but it still requires accurate stitch counting, joined rounds, increases, decreases, bobble stitches, stuffing, and basic sewing.
It is better suited to a confident beginner than someone crocheting amigurumi for the first time.
Real-world beginner usability still needs to be confirmed through physical sample testing.
What Yarn and Hook Should I Use?
Choose a yarn and hook combination that creates a firm fabric suitable for holding stuffing.
The pattern does not currently prescribe a fixed yarn weight or hook size because those specifications have not been physically validated.
How Big Will the Finished Teddy Bear Be?
Finished size depends on the yarn, hook, tension, stuffing, and finishing.
No exact measurement is claimed until a physical sample has been tested.
Final Thoughts
This crochet bear pattern uses a 23-round continuous main construction with integrated legs, arms, and ears, leaving only the muzzle to be crocheted and attached separately.
The body grows to 24 stitches, narrows to an 18-stitch neck, and expands into a 30-stitch head before closing at the top. The separate oval muzzle is intended to reinforce the classic teddy-bear face while keeping assembly to a minimum.
The stitch counts and feature placements have been mathematically verified. Finished proportions, posture, muzzle attachment, facial placement, stuffing behavior, yarn choice, and exact size remain dependent on physical sample testing.




